2004 Hyundai Santa Fe Owner's Manual - Page 214

6 DO-IT-YOURSELF 20 G180A01A-AAT MAINTENANCE CHECKING BRAKE CLEARANCE PEDAL CHECKING G190A01A-AAT DRIVE BELTS Drive belts should be checked periodically for proper tension and adjusted if necessary. At the same time, belts should be examined for cracks, wear, fraying or other evidence of deterioration and replaced if necessary. Belt routing should also be checked to be sure there is no interference between the belts and other parts of the engine. After a belt is replaced, the new belt should be adjusted again after two or three weeks to eliminate slack resulting from initial stretching after use. 2.7 V6 Power steering Auto tensioner 2.4 DOHC Power steering Eng.coolant 0.30~0.48 in. 0.24~0.35 in. 2.95 in. (75 mm) Generator Generator COMP Eng.pulley G180A01L 0.315 in. COMP Eng.pulley HSM396 You need a helper to check the brake pedal clearance. With the engine running, have your helper press down on the brake pedal several times and then hold it down with a force of about 110 lbs (50 kg, 490 N). The brake pedal clearance is the distance from the top surface of the brake pedal to the asphalt sheeting under the floor mat. If the brake pedal clearance is not within the limits specified in the illustration, have it inspected by your Hyundai dealer and adjusted or repaired if necessary. 3.5 V6 Power steering pulley Generator Crank shaft apulley A/C pulley G140D02L