2004 Hyundai Tiburon Owner's Manual - Page 184

6 DO-IT-YOURSELFMAINTENANCE 18 G140D01A-AAT CHANGING THE AIR CONDITIONER FILTER B760B01GK-AAT Checking the Compressor Drive Belt DOHC CVVT A/C 0.315 in. (8 mm) V6 Auto tensioner (If installed) Crank pulley Tension pulley Eng.pulley COMP G140D01GK HGK250 HGK251 2. Open the glove box and remove the mounting screws on the upside of the glove box. When the air conditioning is being used regularly, the compressor drive belt tension should be checked at least once a month with the engine turned off. To check the drive belt tension, press down on the belt halfway between the engine crankshaft and compressor pulleys. Pressing with your finger, you should not be able to deflect this belt anymore than 1/3 of an inch. If you have the instruments to check it, with a force of 22 lb.(98N), the deflection should be 0.315 inches (approx 8.0 mm). If the belt is too loose, have it adjusted by your Hyundai dealer. 1. Remove the mounting screws on the downside of the glove box. HGK253 3. Remove the filter cover.