2004 Hyundai Tiburon Owner's Manual - Page 37

1FEATURES OF YOUR HYUNDAI 24 B180B01GK-GAT Pre-tensioner Seat Belt (If Installed) Your Hyundai vehicle is equipped with driver's and front passenger's pre-tensioner seat belts. The purpose of the pre-tensioner is to make sure that the seat belts fit tightly against the occupant's body in certain frontal collisions. The pre-tensioner seat belts can be activated alone or, where the frontal collision is severe enough, together with the airbags. Driver's airbag 1 Passenger's airbag ! WARNING: To obtain maximum benefit from a pretensioner seat belt: 1. The seat belt must be worn correctly. 2. The seat belt must be adjusted to the correct position. 3 2 B180B01GK NOTE: o Both the driver's and front passenger's pre-tensioner seat belts will be activated in certain frontal collisions. The pretensioner seat belts can be activated alone or, where the frontal collision is severe enough, together with the airbags. o When the pre-tensioner seat belts are activated, a loud noise may be heard and fine dust, which may appear to be smoke, may be visible in the passenger compartment. These are normal operating conditions and are not hazardous. o Although it is harmless, the fine dust may cause skin irritation and should not be breathed for prolonged periods. Wash your hands and face thoroughly after an accident in which the pre-tensioner seat belts were activated. The seat belt pre-tensioner system consists mainly of the following components. Their locations are shown in the illustration. 1. SRS airbag warning light 2. Seat belt pre-tensioner assembly 3. SRS control module HXG229 When the vehicle stops suddenly, or if the occupant tries to lean forward too quickly, the seat belt retractor will lock into position. In certain frontal collisions, the pre-tensioner will activate and pull the seat belt into tighter contact against the occupant's body.