2005 Hyundai Tucson Owner's Manual - Page 232

6 DO-IT-YOURSELFMAINTENANCE 26 G290B01JM-AAT REPLACEMENT OF LIGHT BULBS SPECIFICATION: "H"; Horizontal center line of headlights from ground: 35.6 in.(904 mm) "W"; Distance between each headlight center: 53.4 in.(1,356 mm) "L"; Distance between the headlights and the wall that the lights are tested against: 118 in. (3,000 mm). G260A02A-AAT Adjustment After Headlight Assembly Replacement 30 mm Horizontal line W Vertical line "P" Before attempting to replace a light bulb, be sure the switch is turned to the "OFF" position. The next paragraph shows how to reach the light bulbs so they may be changed. Be sure to replace the burned-out bulb with one of the same number and wattage rating. See page 6-34 for the wattage description. Cut-off line L H ! CAUTION: Ground line Keep the lamps out of contact with petroleum products, such as oil, gasoline, etc. G290B01B If the vehicle has had front body repair and the headlight assembly has been replaced, the headlight aiming should be checked using an aiming chart as shown in the illustration. Turn on the headlight switch. (Low Beam Position) 1. Adjust headlights so that main axis of light is parallel to center line of the body and is aligned with point "P" shown in the illustration. 2. Dotted lines in the illustration show the center of headlights.