2005 Hyundai Tucson Owner's Manual - Page 79

1FEATURES OF YOUR HYUNDAI 68 ! 3.Calibration procedure CAUTION: If the display is "C", calibrate the compass. Drive the vehicle in a circle in a safe, open area at less than 5miles/h 3 times or until the compass heading appears. Driving in a circle in a right-handed direction and opposite direction are possible, and if the calibration is completed, the compass heading will appear. Keep driving in a circle until a compass heading appears. When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as that may cause the liquid cleaner to enter the mirror housing. 2. Press the "COMP" button for more than 3 seconds. The current zone number will appear in the display. 3. Press the "COMP" button until the new zone number appears in the display. After you stop pressing the button, the display will show a compass direction within a few seconds. 1.To operate the compass feature The compass is a convenient feature which displays the compass heading of the vehicle. - ! CAUTION: 4.Setting the compass zone 2."COMP" switch Push the "COMP" switch on the lower part of the mirror, then the vehicle's directional heading will be displayed. Pushing the "COMP" switch again will turn off the display. Heading display - E : East - W : West - S : South - N : North ex) NE : North East 1. Find your current location and variance zone number on the zone map. 1. Do not install a ski rack, antenna, etc. attached to the vehicle by means of a magnet. They affect the operation of the compass. 2. If the compass deviates from the correct indication soon after repeated adjustment, have the compass checked at an authorized dealer. 3. The compass may not indicate the correct compass point in tunnels or while driving up or down a steep hill. (The compass returns to the correct compass point when the vehicle moves to an area where the geomagnetism is stabilized.) B520C06JM