2007 Hyundai Azera Owner's Manual - Page 139

FEATURES OF YOUR HYUNDAI 1 125 B970C01TG-AAT Automatic Operation You can change the temperature mode from Fahrenheit to Centigrade as follows; Press the DUAL and MODE button simultaneously for 3 seconds. The display shows that the unit of temperature is adjusted to Fahrenheit or Centigrade (°F → °C or °C → °F). Photo Sensor B970C01TG HTG2140 The FATC (Full Automatic Temperature Control) system automatically controls heating and cooling as follows: 1. Push the "AUTO" switch. The indicator light will illuminate confirming that the Face, Floor and/or Bi-Level modes as well as the blower speed and air conditioner will be controlled automatically. The air conditioning will operate if ambient temperature is higher than 34.7°F(1.5°C) and automatically turns off if the ambient temperature drops below 33.08°F(0.6°C). 2. Push the "TEMP" button to set the desired temperature. The temperature will increase to the maximum "HI" by pushing on the button. Each push of the button will cause the temperature to increase by 1°F(0.5°C). The temperature will decrease to the minimum "LO" by pushing on the button. Each push of the button will cause the temperature to decrease by 1°F(0.5°C). B970C02TG-A NOTE: Never place anything over the sensor which is located on the instrument panel to ensure better control of the heating and cooling system. NOTE: If the battery has been discharged or disconnected, the temperature mode will reset to 73 °F.