2007 Hyundai Santa Fe Owner's Manual - Page 88

1FEATURES OF YOUR HYUNDAI 76 MULTI-FUNCTION LIGHT SWITCH 3. Average Fuel Consumption Average fuel consumption 4. Outside temperature (If installed) Outside temperature B340A01A-AAT Combination Turn Signal, Headlight and High-beam Switch Turn signal operation Pulling down on the lever causes the turn signals on the left side of the car to blink. Pushing upwards on the lever causes the turn signals on the right side of the car to blink. As the turn is completed, the lever will automatically return to the center position and turn off the turn signals at the same time. If either turn signal indicator light blinks more rapidly than usual, goes on but does not blink, or does not go on at all, there is a malfunction in the system. Check for a burned-out fuse or bulb or see your Hyundai dealer. Odometer Odometer OCM052208A OCM052210R o This mode calculates the average fuel consumption from the total fuel used and the distance since the last average consumption reset. o The total fuel used is calculated from the fuel consumption input. o Average fuel consumption is reset to zero (---) if the battery is disconnected. o To reset the average fuel consumption to zero (---), press and hold the RESET switch for more than 1 second. o When you drive 0.5 mile and less after resetting, the average fuel consumption will be displayed to '---'. This mode indicates the outside temperature between -40°F and 167°F.