2007 Hyundai Tiburon Owner's Manual - Page 127

FEATURES OF YOUR HYUNDAI 1 115 H265B01GK-GAT 1. Power Button and Volume Control (POWER ON/ VOLUME) Press this button when the ignition switch of the automobile is set to ACC (1st notch) or ON (2nd notch) to turn on the power of the audio system. When the power is turned on, turn the volume control clockwise to increase volume and counterclockwise to reduce. Press once again when the audio system is on to turn off the power. 3. Automatic Channel Selection Button (SEEK) Press and hold the [ ] button for more than 0.5 seconds until you hear the beep to automatically increase frequency and press and hold the [ ] button for more than 0.5 seconds until you hear the beep to automatically decrease frequency to select and play the next available channel. If the received channel is memorized in the preset buttons then the screen will display the memorized channel. 5. Preset Button (1~6) Press this button but do not hold for no more than 2 seconds to listen to the channels memorized to each button. If you want to memorize the current channel to the preset button when you are listening to channel not memorized to any of the preset buttons, press the button and hold for more than 2 seconds then the channel will be memorized to the button with the beep. 6. Information Display Screen (LCD) A variety of information will be displayed on the screen including the radio bands (FM1/FM2/ AM) while listening to the radio, frequency of each channel, the number of preset channel and "ST" for FM stereo broadcasting. 2. Radio Band Selection Button (FM/AM) North American Standard o Press this button to listen to either FM or AM. o The radio will be set to each mode each time you press the button in a loop; FM1➟FM2➟AM➟FM1 and soon. European Standard o Press this button to listen to either FM or AM. o The radio will be set to each mode each time you press the button in a loop; FM1➟FM2➟MW➟LW➟FM1 and soon. 4. Manual Channel Selection Control (TUNE) Press and hold [ ] button for less than 0.5 seconds to increase frequency by 1 step and [ ] to decrease. Press and hold [ ] or [ ] button for more than 0.5 seconds even after you hear the beep then the frequency will increase or decrease quickly. When you release the button, the system will turn to the automatic selection mode. 7. Automatic Channel Scan Button Press this button to automatically select next available channel and play the channel for 5 seconds and continuously move to the next available channel and play. Press again when you find the channel you would like to listen to while scanning, press the button again to stop scanning and continue to listen to the channel you selected. And continue to listen to the current channel.