2007 Hyundai Tucson Owner's Manual - Page 70

1FEATURES OF YOUR HYUNDAI 58 MULTI-FUNCTION LIGHT SWITCH 5. Drive Time (Type B) Drive Time B340A01A-AAT B340B01A-AAT COMBINATION TURN SIGNAL, HEADLIGHT AND HIGH-BEAM SWITCH Turn Signal Operation Pulling down on the lever causes the turn signals on the left side of the car to blink. Pushing upwards on the lever causes the turn signals on the right side of the car to blink. As the turn is completed, the lever will automatically return to the center position and turn off the turn signals at the same time. If either turn signal indicator light blinks more rapidly than usual, goes on but does not blink, or does not go on at all, there is a malfunction in the system. Check for a burnedout fuse or bulb or see your Hyundai dealer. Lane Change Signal HJM2187-C HJM2089 o This mode indicates the drive time since the last tripmeter reset. o Even if the vehicle is not in motion, the drive time keeps going while the engine is running. o The meter's working range is from 0:00 to 99:59. o Press the trip computer switch for more than 1 second, when the drive time is being displayed, clears the drive time to zero. To indicate a lane change, move the lever up or down to a point where it begins flashing. The lever will automatically return to the center position when released.