2008 Hyundai Veracruz Owner's Manual - Page 298

Driving your vehicle E070501AUN-EU ESC operation ESC ON condition • When the ignition is turned ON, ESC and ESC OFF indicator lights illuminate for approximately 3 seconds, then ESC is turned on. • Press the ESC OFF button for at least half a second after turning the ignition ON to turn ESC off. (ESC OFF indicator will illuminate). To turn the ESC on, press the ESC OFF button (ESC OFF indicator light will go off). • When starting the engine, you may hear a slight ticking sound. This is the ESC performing an automatic system self-check and does not indicate a problem. When operating When the ESC is in operation, ESC ESC indicator light blinks. • When the Electronic Stability Control is operating properly, you can feel a slight pulsation in the vehicle. This is only the effect of brake control and indicates nothing unusual. • When moving out of the mud or slippery road, pressing the accelerator pedal may not cause the engine rpm (revolutions per minute) to increase. E070502AUN-EU ESC operation off ESC OFF state • To cancel ESC operation, ESC press the ESC OFF button OFF (ESC OFF indicator light illuminates). • If the ignition switch is turned to LOCK position when ESC is off, ESC remains off. Upon restarting the engine, the ESC will automatically turn on again. 5 27