2009 Hyundai Veracruz Owner's Manual - Page 187

Features of your vehicle WINDSHIELD DEFROSTING AND DEFOGGING D250000AEN WARNING - Windshield heating Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection knob or button to the position and fan speed control knob or button to the lower speed. • For maximum defrosting, set the temperature control to the extreme right/hot position and the fan speed control to the highest speed. • If warm air to the floor is desired while defrosting or defogging, set the mode to the floor-defrost position. • Before driving, clear all snow and ice from the windshield, rear window, outside rear view mirrors, and all side windows. • Clear all snow and ice from the hood and air inlet in the cowl grill to improve heater and defroster efficiency and to reduce the probability of fogging up the inside of the windshield. OEN046137N Manual climate control system D250101AEN-EU To defog inside windshield 1. Select desired fan speed. 2. Select desired temperature. 3. Set the mode to the or position. 4. The outside (fresh) air will be selected automatically. If the outside (fresh) air position is not selected automatically, press the corresponding button manually. If the position is selected, lower fan speed is adjusted to a higher fan speed. 4 106