2010 Hyundai Genesis Coupe Owner's Manual - Page 372

Maintenance 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 4. Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket. 5. Insert a new bulb by inserting it into the socket and rotating it until it locks into place. 6. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise. 7. Install the service cover by putting it into the service hole. OBH078035 G220400AEN G220500AEN OBH078036 High mounted stop light replacement If the light is not operating, have the vehicle checked by an authorized HYUNDAI dealer. License plate light bulb replacement 1. Loosen the lens retaining screws with a philips head screwdriver. 2. Remove the lens. 3. Remove the bulb by pulling it straight out. 4. Install a new bulb. 5. Reinstall the lens securely with the lens retaining screws. Back-up, stop and tail light If the light is not operating, have the vehicle checked by an authorized HYUNDAI dealer. 7 57