2010 Hyundai Genesis Owner's Manual - Page 250

2010 Hyundai Genesis Manual

Page 250 highlights

Driving your vehicle The EPB malfunction indicator may illuminate when the ESC indicator comes on to indicate that the ESC is not working properly, but it does not indicate a malfunction of the EPB. E070704BBH Emergency braking If there is a problem with the foot brake while driving, emergency braking is possible by pressing and holding the EPB switch. Braking is possible only while you are holding the EPB switch. OBH058057 E070703ABH OBH058058 E070706BBH EPB malfunction indicator (if equipped) The EPB malfunction indicator will illuminate when the ignition switch is turned ON, but should go off after approximately 3 seconds, if the system is operating normally. If the EPB malfunction indicator remains on, comes on while driving, or does not come on when the ignition switch is turned to the ON position, this indicates that the EPB may have malfunctioned. Take your vehicle to an authorized HYUNDAI dealer and have the system checked. EPB emergency release WARNING Do not operate the parking brake while the vehicle is moving except in an emergency situation. ✽ NOTICE During emergency braking by the EPB, the parking brake warning light will blink to indicate that the system is operating. If the EPB does not release properly, do as follows: 1. Shift the shift lever into P (Park). 2. Block the wheels. 3. Open the trunk and remove the cover. 4. Remove the emergency release handle from the tool case. 5. Remove the emergency release cable cover. 6. Install the emergency release handle into the threaded end of the emergency release cable by turning it clockwise. 7. Pull up the handle until sounds a "took". The EPB warning light blinks. 5 23

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.