2010 Hyundai Veracruz Owner's Manual - Page 244

Features of your vehicle While the RSE is selected as the source by the front vehicle radio, the front vehicle radio will be able to control some RSE functions (e.g. Fast Forward / Reverse, Previous / Next Track, etc.). See your vehicle radio user manual for more information. ✽ NOTICE When switching from the vehicle radio to the RSE, there is a slight delay while the RSE initializes. The RSE control panel will display "READ" while the disc initializes, then begin playing the disc. The RSE control panel will display "REAR" if the current source is the RSE player, "FRONT" if the current source is the front vehicle radio. 6. Play/Pause Button You do not need to press the PLAY/ PAUSE button after loading a disc to begin playing the disc. The player will start playing automatically. While a disc is playing, press to pause. While paused, the elapsed time of the current disc will blink on the monitor status display, and "PAUSE" will be displayed on the RSE control panel. Press the button again to resume play. EN-DEL-3A 5. SRC (Source) Button After inserting a disc in the RSE, it will automatically use that as the source and begin playing that disc. The RSE control panel will display "DISC IN" when there is disc loaded in the player. Pressing the SRC button will bring out the Source Change Operation. All available modes are presented. You can select any available mode by using the four direction arrow buttons and press the ENTER button for completing the selection. ✽ NOTICE The RSE will enter standby mode when the vehicle ignition is turned off. When the vehicle is turned back on within 30 seconds, the RSE will turn on and the DVD/VCD will automatically begin playing again at the point where it paused. If the vehicle is turned off for longer than 30 seconds, the RSE system will not turn on automatically when the vehicle is restarted. 4 162