2013 Hyundai Genesis Coupe Owner's Manual - Page 394

Maintenance LIGHT BULBS G220000AEN CAUTION WARNING - Working on the lights Prior to working on the light, firmly apply the parking brake, ensure that the ignition switch is turned to the LOCK position and turn off the lights to avoid sudden movement of the vehicle and burning your fingers or receiving an electric shock. Use only the bulbs of the specified wattage. If you don't have necessary tools, the correct bulbs and the expertise, consult an authorized HYUNDAI dealer. In many cases, it is difficult to replace vehicle light bulbs because other parts of the vehicle must be removed before you can get to the bulb. This is especially true if you have to remove the headlight assembly to get to the bulb(s). Removing/installing the headlight assembly can result in damage to the vehicle. OBH071053 G220100BBH ✽ NOTICE CAUTION Be sure to replace the burned-out bulb with one of the same wattage rating. Otherwise, it may cause damage to the fuse or electric wiring system. Headlight, position light, turn signal light, side marker light and front fog light bulb replacement (1) Headlight (High) (2) Headlight (Low) (3) Front side marker light (4) Front turn signal light (5) Position light (6) Front fog light (if equipped) After driving in rain or washing, the headlight and taillight lenses could appear frosty. This condition is caused by the temperature difference between the lamp inside and outside. This is similar to the condensation on your windows inside your vehicle during the rain and doesn't indicate a problem with your vehicle. If the water leaks into the lamp bulb circuitry, have the vehicle checked by an authorized HYUNDAI dealer. 7 60