1996 Toyota Camry Owners Manual - Page 115

(a) Controls and functions The temperature control knob is used to adjust the temperature of the delivered air. Turn the knob toward the HIGH position for higher temperature and toward the LOW position for lower temperature. The air intake control lever is used to select intake air, either outside air or recirculated air. With the lever in the OUTSIDE AIR position, the system will take fresh outside air into the unit. For recirculated air, move the lever to the RECIRCULATED AIR position. The air flow control knob is used to select the air flow outlets air is delivered from. See "(f) Air flow selection" for detailed information. The fan speed control knob is used to turn on and off the fan and select the fan speed. The higher the fan speed setting is, the more air is delivered. Turning the knob to the "OFF" position turns off the fan. The air conditioning on-off button is used to turn on and off the air conditioning. With the button pressed in, the air conditioning turns on. Pressing the button once again will turn the air conditioning off. If the indicator light flashes, contact your Toyota dealer as soon as possible. There may be slippage of the drive belt or trouble in the compressor. If this happens, the air conditioning is automatically turned off to avoid damage to the drive belt. (b) Heating 1. Turn the temperature control knob anywhere except the LOW position. When dehumidified heating is desired, turn the knob between the HIGH and middle positions. If cooler air is desired at face level for bilevel operation, turn the knob around the middle. 2. Move the air intake control lever to the OUTSIDE AIR position. If quick circulation of heated air is desired, move the lever to the RECIRCULATED AIR position. For normal use, it is best to keep the lever in the OUTSIDE AIR position. Otherwise the windows will fog up more easily. 3. Turn the air flow control knob to the FLOOR position. If cooler air is desired at face level for bilevel operation, turn the knob to the BILEVEL position. If the windshield fogs up easily, turn the knob to the FLOOR/WINDSHIELD position. For detailed information on air flow control including other settings, see "(f) Air flow selection". 4. Turn the fan speed control knob anywhere except the "OFF" position. 5. Leave the air conditioning on-off button in the OFF position. If dehumidified heating is desired, press in the air conditioning on-off button. (c) Cooling 1. Turn the temperature control knob anywhere between the middle and LOW positions. If warmer air is desired at floor level for bilevel operation, turn the knob around the middle. 2. Move the air intake control lever to the OUTSIDE AIR position. If quick circulation of cooled air is desired, move the lever to the RECIRCULATED AIR position. For normal use, it is best to keep the lever in the OUTSIDE AIR position. 3. Turn the air flow control knob to the FACE position. If warmer air is desired at floor level for bilevel operation, turn the knob to the BILEVEL position. 109