1996 Toyota Camry Owners Manual - Page 78

(c) Backing up 1. Bring the vehicle to a complete stop. 2. With the brake pedal held down with your foot, shift the selector lever to the "R" position. NOTICE Never shift into reverse while the vehicle is moving. (d) Parking 1. Bring the vehicle to a complete stop. 2. Pull the parking brake lever up fully to securely apply the parking brake. 3. With the brake pedal pressed down, shift the selector lever to the "P" position. (e) Good driving practice S If the transmission is repeatedly upshifted and downshifted between the third gear and overdrive when climbing a gentle slope, the overdrive switch should be turned off. Be sure to turn the switch on immediately afterward. S When towing a trailer, in order to maintain engine braking efficiency, do not use overdrive. ! CAUTION Always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping. ! CAUTION While the vehicle is moving, never attempt to move the selector lever into "P" position under any circumstances. Serious mechanical damage and loss of vehicle control may result. (f) Driving in "PWR" mode In the "PWR" mode, the transmission is shifted up and down at a higher vehicle speed than in the "NORM" mode and a more powerful acceleration is achieved. To set the "PWR" mode, push in the driving pattern selector button. The "PWR" mode indicator light comes on. For ordinary driving, Toyota recommends using the "NORM" mode to improve fuel economy. (g) If you cannot shift the selector lever out of "P" position If you cannot shift the selector lever from "P" position even though the brake pedal is depressed, use the shift lock override button. For instructions, see "If you cannot shift automatic transmission selector lever" in Part 4. NOTICE Do not hold the vehicle on an upgrade with the accelerator pedal. It can cause the transmission to overheat. Always use the brake pedal or parking brake. 72