1996 Toyota Camry Owners Manual - Page 98

3. Press the "1" button while holding the right side of "TUNE" button in. "- - -" and the tape operation indicator will appear on the display. 4. Input your identification number by pressing the "1", "2" and "3" buttons repeatedly. Use the "1" button for the first digit, the "2" button for the second digit and the "3" button for the last digit. For example, if your number is 824, press the "1" button nine times, the "2" button three times and the "3" button five times. if the display returns to "- - -" while inputting, try again. We recommend that your identification number be associated with something easy to remember. In case you are unsure of the number, write it in a notebook you normally carry. Do not leave it behind in your vehicle. 5. With your identification number appearing on the display, press the "SCAN" button and hold it in until "SEC" appears on the display. "SEC" will go off to indicate the system is set. If invalid buttons have been used, "Err" will appear on the display before "SEC" appears. Try again from the step 3. Once the system is set, the indicator light turns on and off with the ignition switch in "OFF" and "SEC" will appear each time the key is turned to the "ACC" position. To change the identification number for some reason, cancel the system (See "Cancelling the anti-theft system") and set it again with a new number. 92