1996 Toyota Celica Owners Manual - Page 90

-Anti-theft system (Type 2-2 and 3 only) The anti-theft system prevents the audio system from working after it has been disconnected. To activate the system, you must set a three-digit security code. After the system is set, "SEC" will appear in the display each time the ignition is turned from "LOCK" to "ACC" or "ON". Also, the anti-theft light flashes every few seconds while the ignition key is in the "LOCK" position. You will need to know your security code to reactivate your radio after electrical service is performed on your vehicle. Choose a security code that is easy to remember and keep a copy of it (not in your Toyota). NOTICE If you pushed any wrong buttons on the anti-theft system, the following messages will appear on the display. z"Err"-You have pushed wrong buttons. z"1-9"-Indicates the number of errors you have made. You may make up to nine errors, but no more! z"HELP"-The number of errors you can make was exceeded. The audio sytem is completely inoperable. Contact you Toyota dealer. Setting a security code for the first time. 1. Turn off the audio system. Turn ignition key to "ACC". Simultaneously push and hold in "1", "6", and "PWR/VOL" until "SEC" appears on the display. 2. While you are holding in the "∧" side of "TUNE", push "1". The display will read "- - -". On some modes, "B" and "Y" will also turn on. 83