1996 Toyota Corolla Owners Manual - Page 50
1996 Toyota Corolla Manual
Page 50 highlights
Your vehicle has anchors for securing the top strap of a child restraint system. The anchor nuts are welded beneath the sheet metal to permit installation of an anchor bracket for a child restraint system. To install an anchor bracket, use an 8 mm x 30 mm x 1.25 mm coarse thread metric bolt and 10 mm (0.4 in.) spacer. Note that the bolts accompanying many child restraint systems are not metric. You can damage the anchor nuts on your vehicle if you force bolts with different thread into the anchor nuts. For instructions about how to install the anchor bracket, see "(C) TOP STRAP ANCHORS AND LOCATIONS". If your child restraint system does not provide any of the necessary parts, you can purchase the following items from your Toyota dealer. * CRS installation kit (Part No. 04731-22012) -contains 1 bolt, 3 types of spacers and 1 locking clip. * Bolt (Part No. 91511-60830) (A)INSTALLATION ON REAR SEAT CENTER When installing a rear-facing child restraint system, follow the same procedure as when installing a forward-facing child restraint system. ! CAUTION Do not use a rear-facing child restraint system in the rear seat if it interferes with the lock mechanism of the front seats. This may cause severe injury to the child and front passenger in case of sudden braking or a collision. 44