1996 Toyota Corolla Owners Manual - Page 82

Your automatic transmission has a shift lock system to minimize the possibility of incorrect operation. This means you can only shift out of "P" position when the brake pedal is depressed (with the ignition switch in "ON" position and the lock release button depressed). (a) Normal Driving 1. Start the engine as instructed in "How to start the engine" in Part 3. The transmission must be in "P" or "N". 2. With your foot holding down the brake pedal, shift the selector lever to "D". In "D" position, the automatic transmission system will select the most suitable gear for running conditions such as normal cruising, hill climbing, hard towing, etc. Always turn the overdrive switch on for better fuel economy and quieter driving. If the engine coolant temperature is low, the transmission will not shift into the overdrive gear even with the overdrive switch on. (b) Using engine braking To use engine braking, you can downshift the transmission as follows: S Turn off the overdrive switch. The "O/D OFF" indicator light will come on and the transmission will downshift to the third gear. S Shift into the "2" position. The transmission will downshift to the second gear when the vehicle speed drops down to or lower than the maximum allowable speed for second gear, and more powerful engine braking will be obtained. S Shift into the "L" position. The transmission will downshift to the first gear when the vehicle speed drops down to or lower than the maximum allowable speed for "L" position and maximum engine braking will be applied. MAXIMUM ALLOWABLE SPEEDS "2" ...110 km/h (68 mph) "L" ...60 km/h (38 mph) ! CAUTION Never put your foot on the accelerator pedal while shifting. 3. Release the parking brake and brake pedal. Depress the accelerator pedal slowly for smooth starting. 76