1996 Toyota Previa Owners Manual - Page 35

SEAT BELTS FOR SWIVEL TYPE SECOND ROW SEAT (FACING FRONT) For the swivel type second row seat, use 3-point type seat belt when it is facing front. Fasten your belt in the same way ensuring the shoulder portion of the belt passes over the top of the outside armrest and the lap portion of the belt passes under the outside armrest as shown. Seat belts with an adjustable shoulder anchor- Adjust the shoulder anchor position to your size. To adjust the anchor position, pull the knob out and slide it up or down. Release the knob and make sure the anchor is locked in position. Adjust the position of the lap and shoulder belts Position the lap belt as low as possible on your hips-not on your waist, then adjust it to a snug fit by pulling the shoulder portion upward through the latch plate. ! CAUTION S High-positioned lap belts and loose-fitting belts both could cause severe injury due to sliding under the lap belt during an accident. S For your safety, do not place the shoulder belt under your arm. ! CAUTION Always be sure that the belt is positioned across your shoulder, as close to your neck as possibl; not on your uper arm or on your neck. Failure to do so could reduce the amount of protection in an accident and increase the chance of injury. ! CAUTION Always wear the belt with the shoulder portion over the outside armrest and the lap portion under the outside armrest. Failure to do so may increase the chance of injury in an accident. 30