1997 Toyota Previa Owners Manual - Page 65

-Top strap anchors and locations If your child restraint system requires the use of a top strap, latch the hook onto the anchor bracket and tighten the top strap. See the following instructions to install the anchor bracket. All models -On the floor behind the seat a. Using the illustration as a guide, cut out the carpet on the floor behind the seat. The anchor holes are plugged. b. Remove the anchor plug you wish to use and insert the spacer (15 mm [0.6 in.]). Tighten down the anchor bracket for your child restraint system with a bolt. To comply with Canada Motor Vehicle Safety Standards, vehicles sold in Canada are provided with a bracket set in the glovebox, designed for use with any of the 3 anchor locations shown in the illustration. If your child restraint system does not provide any of the necessary parts, ask your Toyota dealer. (See "-Child restraint system") If you remove the anchor brackets when the child restraint system is necessary no longer, replace the seals in the holes to prevent entry of exhaust emissions, water or dirt. 60