1997 Toyota T100 Owners Manual - Page 22

-Moving passenger's seat for rear seat entry (Xtra-cab models) ADJUSTING SEAT POSITION Pull the lock release lever up. Then slide the seat to the desired position with slight body pressure and release the lever. ADJUSTING SEATBACK ANGLE (except non-split bench seat) Lean forward and pull the lever up. Then lean back to the desired angle and release the lever. ADJUSTING DRIVER'S SEAT CUSHION ANGLE (separate seat only) Turn the knob either way. ADJUSTING DRIVER'S SEAT LUMBAR SUPPORT (separate seat only) Pull the lever forward and rerlease. Repeat this until you have a comfortable support. ! CAUTION To reduce the risk of sliding under the lap belt during a collision, avoid reclining the seatback any more than needed. The seat belts provide maximum protection when the driver and the passenger are sitting up straight and well back in the seats. If you are reclined, the lap belt may slide past your hips and apply restraint forces directly to the abdomen. Therefore, in the event of a frontal collision, the risk of personal injury may increase with increasing recline of the seatback. For easy access to the rear seat, do this. 1. Lift the seatback lock release lever or press the release pedal. The seat will slide forward slightly. 2. Move the seat to the front-most position. After passengers are in, lift up on the seatback and return the seat until it locks. 17