1998 Toyota Corolla Owners Manual - Page 65

1998 COROLLA(U) -Top strap anchors and locations Anchor bracket Spacer Bolt 190.75 mm (7.5 in.) 153.0 mm (6.0 in.) 216.5 mm (8.5 in.) 2. To remove the child restraint system, press the buckle−release button and allow the belt to retract. If your child restraint system requires the use of a top strap, latch the hook onto the anchor bracket and tighten the top strap. See the following instructions to install the anchor bracket. On the filler panel behind the rear seat a. Using the illustration as a guide, run your fingers across the trim of the filler panel itself to locate the position of the holes underneath. b. Make a hole in the covering directly above the hole in the filler panel. c. Insert a 15 mm (0.6 in.) spacer and tighten down the anchor bracket for your child restraint system with a bolt. Torque the bolt to 16.5-24.7 N⋅ m (1.68-2.52 kgf⋅ m, 12.2-18.2 ft⋅ lbf). 65