1998 Toyota Land Cruiser Owners Manual - Page 244

TRANSFER Oil capacity, L (qt., Imp. qt.) 1.3 (1.4, 1.1) Oil type: Gear oil API GL- 4 or GL- 5 Recommended oil viscosity: SAE 75W- 90 AUTOMATIC TRANSMISSION Fluid capacity (drain and refill), L (qt., Imp. qt.) Up to 1.9 (2.0, 1.7) Fluid type: Automatic transmission fluid DEXRONRIII (DEXRONRII) DIFFERENTIAL Oil capacity, L (qt., Imp. qt.): Front 1.7 (1.8, 1.5) Rear With rear differential lock system 3.2 (3.4, 28) Without rear differential lock system 3.3 (3.5, 2.9) D-II or Oil type: Standard differential Hypoid gear oil API GL- 5 Limited slip differential Hypoid gear oil for limited slip differential API GL- 5 Recommended oil viscosity: Above -18_C (0_F) SAE 90 Below -18_C (0_F) SAE 80W or 80W- 90 CHASSIS LUBRICATION Wheel bearings: Lithium base NLGI No. 2 wheel bearing grease, BRAKES Minimum pedal clearance when depressed with the pressure of 490 N (50 kgf, 110 lbf) with the engine running, mm (in.): 116 (4.6) Pedal freeplay, mm (in.): 1-6 (0.04-0.24) Pad wear limit, mm (in.): 1.0 (0.04) Lining wear limit, mm (in.): 1.0 (0.04) Parking brake adjustment when pulled with the force of 196 N (20 kgf, 44 lbf): 4-6 clicks Fluid type: SAE J1703 or FMVSS No. 116 DOT 3 STEERING Wheel freeplay: Less than 40 mm (1.6 in.) Power steering fluid type: Automatic transmission fluid DEXRONRII or III SUSPENSION Fluid type: Suspension fluid AHC Front drive shaft thrust bushings: Synthetic oil and lithium soap base chassis grease, NLGI No.1 Propeller shafts: Lithium base wheel NLGI No. 2 bearing grease, 244