1998 Toyota RAV4 Owners Manual - Page 40

'98 Rav4U -Front seat belts and rear outside seat belts If the seat belt cannot be pulled out of the retractor, firmly pull the belt and release it. You will then be able to smoothly pull the belt out of the retractor. When a passenger's shoulder belt is completely extended and is then retracted even slightly, the belt is locked in that position and cannot be extended. This feature is used to hold the child restraint system securely. (For details, see "Child restraint" in this chapter.) To free the belt again, fully retract the belt and then pull the belt out once more. Adjust the seat as needed and sit straight and well back in the seat. fasten your belt, pull it out of the tractor and insert the tab into buckle. up To rethe CAUTION Seat belts with an adjustable shoulder anchor- Adjust the shoulder anchor position to your size. To adjust the anchor position, pull the knob out and slide it up or down. Release the knob and make sure the anchor is locked in position. D After inserting the tab, make sure the tab and buckle are locked and that the belt is not twisted. You will hear a click when the tab locks into the buckle. The seat belt length automatically adjusts to your size and the seat position. The retractor will lock the belt during a sudden stop or on impact. It also may lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend, and you can move around freely. D Do not insert coins, clips, etc. in the buckle as this may prevent you from properly latching the tab and buckle. D If the seat belt does not function normally, immediately contact your Toyota dealer. Do not use the seat until the seat belt is fixed. It cannot protect an adult occupant or your child from injury. 40