1998 Toyota RAV4 Owners Manual - Page 35

Error codes on the charge control panel NOTICE The charging operation stops in the case of power failure or may stop by any other reason such as inappropriate environment for charging to protect battery life. If this occurs, the "ERR" appears on the control panel with the motor switch turned to "ON". Apply a charge again. If charging stops in the middle of operation again, take your vehicle to EV service station. Code KEY Code ERR The motor switch is at "ON". ACTION Turn the motor switch to "LOCK" Error other than listed on the left ACTION Apply a charge again. If the same and remove the key. error appears again, contact EV service station. If the charging does not finish correctly, "ERR" appears on the display for 10 seconds by turning the motor switch to "ON" after charging. Code CON The charge connector is not securely connected or locked to the connector on the vehicle. ACTION Make sure the charge connector is Code FAN securely connected to the connector on the vehicle. Charging has finished and traction batteries have been cooled. Code P The selector lever is not in "P". ACTION Shift the selector lever into "P". 27