1998 Toyota RAV4 Owners Manual - Page 98

Sound balance adjustment function- This knob is also to adjust the sound balance between the front and rear, and the right and left speakers. For front/rear adjustment, push "AUDIO CONTROL / MODE" repeatedly until "FAd" appears on the display. Then turn the knob to adjust the front/rear balance. The display will show the range from "FAd F7" to "FAd R7". For left/right adjustment, push "AUDIO CONTROL / MODE" repeatedly until "BAL" appears on the display. Then turn the knob to adjust the left/right balance. The display will show the range from "BAL L7" to "BAL R7". CD (Compact Disc) Push "CD" to switch from radio or cassette operation to compact disc operation. If the audio system is off, you can turn on the compact disc player by pushing "CD". In both cases, a disc must already be loaded in the player. When the audio is set into compact disc operation, the display shows the track or, track and disc number currently being played. Each time you push "CD", the system changes between single disc player and automatic changer. Your audio system shows six different display if the player malfunctions. If "WAIT" appears on the display, it indicates inside the player unit may be too hot due to the very high ambient temperature. Remove the disc or magazine from the player and allow the player to cool down. If "Err 1" appears on the display, it indicates the disc is dirty, damaged, or it was inserted up- side down. Clean the disc or insert it correctly. If "Err 2" appears on the display, it indicates no disc is loaded inside the magazine, insert a disc. If "Err 3" or "Err 4" on the display, it indicates there is a trouble inside the system. Eject the disc or magazine. Set the disc or magazine again. If "OPEn" appears on the display, it indicates the compact disc auto changer lid is open. Close the compact disc auto changer lid. If the malfunction is not recovered, take your vehicle to your EV service station. DISC Push the either side of the button until the number of the disc you want to listen to appears on the display. Dolbyr B NR∗ If you are listening to a tape that was recorded with Dolbyr B Noise Reduction, push the button marked with the double- D symbol. The double- D symbol will appear on the display. Push the button again to turn off Dolbyr B NR. The Dolby NR mode reduces tape noise by about 10 dB. For best sound reproduction, play your tapes with this button on or off according to the mode used for recording the tape. ∗ : Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" are trademarks of Dolby and the double D symbol Laboratories Licensing Corporation. FM Push "FM" to or "FM2" will system allow tions, two for switch the FM band. "FM1" appear on the display. This you to set twelve FM staeach button. ∨∧ Compact disc auto changer only- By using this button, you can select a disc you wish to listen to. If the audio system is off, you can turn on the radio by pushing "FM". Also, push "FM" to switch from cassette or compact disc operation to radio operation. 90