1998 Toyota Tercel Owners Manual - Page 44

-Types of child restraint system CAUTION When not using the child restraint system, keep it secured with the seat belt or place it in the trunk or somewhere other than the passenger compartment. This will prevent it from injuring passengers in the event of a sudden stop or accident. Your vehicle has anchors for securing the top strap of a child restraint system. The anchor nuts are welded beneath the sheet metal to permit installation of an anchor bracket for a child restraint system. To install an anchor bracket, use an 8 mm × 30 mm × 1.25 mm coarse thread metric bolt and a 10 mm (0.4 in.) spacer. Note that the bolts accompanying many child restraint systems are not metric. You can damage the anchor nuts on your vehicle if you force bolts with different thread into the anchor nuts. For instructions about how to install the anchor bracket, see "-Top strap anchors and locations". If your child restraint system does not provide any of the necessary parts, you can purchase the following items from your Toyota dealer. ∗ D Vehicles with a passenger airbag: Never put a rear- facing child restraint system on the front seat. In the event of an accident, the force of the rapid inflation of the airbag can cause death or serious injury if a rear- facing child restraint system is put on the front seat. Unless it is unavoidable, do not put a forward- facing child restraint system on the front seat. A forward- facing child restraint system should be allowed to put on the front seat only when it is unavoidable. Always move the seat as far back as possible, because the force of a deploying airbag could cause death or serious injury to the child. Child restraint systems are classified into the following 3 types depending on the child's age and size. (A) Infant seat (B) Convertible seat (C) Booster seat Install the child restraint system following the instructions provided by its manufacturer. D After installing the child restraint system, make sure it is secured in place following the manufacturer's instructions. If it is not restrained securely, it may cause death or serious injury to the child in the event of a sudden stop or accident. CRS installation kit (Part No.04731- 22012)-contains 1 bolt, 3 types of spacers and 1 locking clip. Bolt (Part No.91511- 60830) ∗ 44