1999 Toyota 4Runner Owners Manual - Page 71

4RUNNER ( ) -Top strap anchors and locations Anchor bracket Bolt 730mm (28.7 in.) This model sold in Canada is provided with a bracket set in the glove box, designed for use with any of the 2 anchor locations shown in the illustration. If your child restraint system does not provide any of the necessary parts, ask your Toyota dealer. (See "-Child restraint system".) Spacer 380mm (15.0 in.) 380mm (15.0 in.) If your child restraint system requires the use of a top strap, latch the hook onto the anchor bracket and tighten the top strap. See the following instructions to install the anchor bracket. On the luggage compartment floor a. Using the illustration as a guide, run your fingers across the trim of the filler panel itself to locate the position of the holes underneath. b. Make a hole in the covering directly above the hole in the luggage compartment floor. c. Insert a 15 mm (0.6 in.) spacer and tighten down the anchor bracket for your child restraint system with a bolt. Torque the bolt to 16.5-24.7 N⋅ m (1.68-2.52 kgf⋅ m, 12.2-18.2 ft⋅ lbf). 71