1999 Toyota Camry Owners Manual - Page 270

'99camry U Bolt Anchor bracket Spacer Anchor bracket Bolt Bolt Spacer Anchor bracket 345 mm (13.6 in.) Spacer 100 mm (4.0 in.) 185 mm (7.3 in.) 100 mm (4.0 in.) TYPE A On the filler panel behind the rear seat Center anchor- a. Using the illustration as a guide, run your fingers across the trim of the filler panel itself to locate the position of the holes underneath. b. Make a hole in the covering directly above the hole in the filler panel. c. Insert a 15 mm (0.6 in.) spacer and tighten down the anchor bracket for your child restraint system with a bolt. Torque the bolt to 16.5-24.7 N⋅ m (1.68-2.52 kgf⋅ m, 12.2-18.2 ft⋅ lbf). Outside anchors- a. Remove the cap as shown in the illustration. b. Insert a 15 mm (0.6 in.) spacer and tighten down the anchor bracket for your child restraint system with a bolt. Torque the bolt to 16.5-24.7 N⋅ m (1.68-2.52 kgf⋅ m, 12.2-18.2 ft⋅ lbf). TYPE B On the filler panel behind the rear seat Center anchor- a. Using the illustration as a guide, run your fingers across the trim of the filler panel itself to locate the position of the holes underneath. b. Make a hole in the covering directly above the hole in the filler panel. c. Insert a 15 mm (0.6 in.) spacer and tighten down the anchor bracket for your child restraint system with a bolt. Torque the bolt to 16.5-24.7 N⋅ m (1.68-2.52 kgf⋅ m, 12.2-18.2 ft⋅ lbf). 72