1999 Toyota Camry Owners Manual - Page 271

'99camry U Tilt steering wheel To comply with Canadian Motor Vehicle Safety Standards, this model sold in Canada is provided with a bracket set in the glovebox, designed for use with any of the 3 anchor locations shown in the illustration. If your child restraint system does not provide any of the necessary parts, ask your Toyota dealer. (See "-Child restraint system".) Outside anchors- a. Should you select to use the outer anchor positions, please contact your Toyota dealer for proper modifications to the filler panel. b. After modifications have been made to the filler panel, insert a 15 mm (0.6 in.) spacer and tighten down the anchor bracket for your child restraint system with a bolt. Torque the bolt to 16.5-24.7 N⋅ m (1.68-2.52 kgf⋅ m, 12.2-18.2 ft⋅ lbf). c. Securely latch the hook of the top strap onto the anchor bracket and make sure the hook does not make contact with the filler panel. To change the steering wheel angle, hold the steering wheel, pull up the lock release lever, tilt the steering wheel to the desired angle and release the lever. When the steering wheel is in a low position, it will spring up as you release the lock release lever. 73