1999 Toyota Sienna Owners Manual - Page 27

name. SIENNA (45403U) Power windows After replacing battery, check that the transmitter operates properly. If the transmitter still does not operate properly, contact your Toyota dealer. If you lose your transmitter, contact your Toyota dealer as soon as possible to avoid the possibility of theft, or an accident. MODEL/FCC ID: GQ43VT14T CAN: 1470102849 MADE IN U.S.A. 3. Put a new transmitter battery with positive (+) side up. Close the transmitter case securely. This complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The windows can be operated with the switch on each front door. The power windows work when the ignition switch is in the "ON" position. Key off operation: If both front doors are closed, they work for 45 seconds even after the ignition switch is turned off. They stop working when either front door is opened. OPERATING THE DRIVER'S WINDOW Use the switch on the driver's door. Normal operation: The window moves as long as you hold the switch. To open: Lightly push down the switch. To close: Pull up the switch. NOTICE z Make sure the positive side and negative side of the transmitter battery should be faced correctly. z Be careful not to bend the electrode of the transmitter battery insertion and that dust or oils do not adhere to the transmitter case. z Close the transmitter case securely. 27