2000 Toyota 4Runner Owners Manual - Page 199

1. Use a phillips- head screwdriver and remove the clip. 2. Unhook the towing hook cover. -Emergency towing hook precautions D Before emergency towing, check that the hook is not broken or damaged and that the installation bolts are not loose. CAUTION If the emergency towing hook is used to get out when your vehicle becomes struck in mud, sand or other condition from which the vehicle cannot be driven out under its own power, make sure to observe the precautions mentioned below. Otherwise, excessive stress will be put on the hook and the towing cable or chain may break, causing serious injury or damage. D Fasten the towing cable or chain securely to the hook. D Do not jerk the hook. Apply steady and even force. D To avoid damaging the hook, do not pull from the side or at a vertical angle. Always pull straight ahead. D If the towing vehicle can hardly move, do not forcibly continue the towing. Contact your Toyota dealer or a commercial tow truck service for assistance. D Tow the vehicle as straight ahead as possible. D Keep away from the vehicle during towing. 2000 4Runner (OM35762U) 213