2000 Toyota MR2 Spyder Owners Manual - Page 16

MR2 U Engine hood SB12069 SB12044 SB12038 To open the engine hood: 1. Pull the engine hood lock release lever. The engine hood will spring up slightly. The engine hood lock release lever can be locked by the key. 2. In rear of the vehicle, lift the engine hood. 3. Hold the engine hood open by inserting the support rod into the slot. Before closing the engine hood, check to see that you have not forgotten any tools, rags, etc. and return the support rod to its clip-this prevents rattles. Then lower the engine hood and make sure it locks into place. If necessary, press down gently on the rear edge to lock it. CAUTION Be careful not to touch the engine hood, the support rod, or surrounding area which could be hot after driving, to prevent burning yourself. CAUTION Before driving, be sure that the engine hood is closed and securely locked. Otherwise, the engine hood may open unexpectedly while driving and an accident may occur. CAUTION After inserting the support rod into the slot, make sure the rod supports the engine hood securely from falling down on to your head or body. 16 2000 MR2 (OM17475U)