2000 Toyota Sienna Owners Manual - Page 222

00 SIENNA(U) -Reinstalling wheel ornament 10. Reinstall the wheel ornament. 1. Put the wheel ornament into position. Steel wheel models, align the cutout of the wheel ornament with the valve stem as shown. 2. Then tap it firmly with the side or heel of your hand to snap it into place. -After changing wheels 11. Check the air pressure of the replaced tire. Adjust the air pressure to the specification designed in Section 8. If the pressure is lower, drive slowly to the nearest service station and fill to the correct pressure. Do not forget to reinstall the tire inflation valve cap as dirt and moisture could get into the valve core and possibly cause air leakage. If the cap is missing, have a new one put on as soon as possible. 12. Restow all the tools, jack and flat tire securely. As soon after changing wheels as possible, tighten the wheel nuts to the torque specified in Section 8 with a torque wrench and have a technician repair the flat tire. Vehicles with a spare tire of the same size as the installed tires- 13. Push the tire pressure warning system reset switch. Initial adjustment of the tire pressure warning system is necessary after you have replaced your tires or wheels. See "Tire pressure warning system" in Section 1−8. CAUTION Take due care in handling the ornament to avoid unexpected personal injury. Steel wheels Aluminum wheels 222