2000 Toyota Tundra Owners Manual - Page 29

TUNDRA (34413U) Seat belts with an adjustable shoulder anchor- Adjust the shoulder anchor position to your size. Standard cab models- To raise: Slide the anchor up. To lower: Push in the lock release button and slide the anchor down. Access cab models- To raise: Slide the anchor up. To lower: Pull the lock release knob and slide the anchor down. After adjustment, make sure the anchor is locked in position. Keep as low on hips as possible Take up slack Too high CAUTION D High- positioned lap belts and loose- fitting belts both could cause serious injuries due to sliding under the lap belt during a collision or other unintended result. Keep the lap belt positioned as low on hips as possible. shoulder belt under your arm. D For your safety, do not place the Adjust the position shoulder belts. of the lap and possible then adshoulder plate. CAUTION Always make sure the shoulder belt is positioned across the center of your shoulder. The belt should be kept away from your neck, but not falling off your shoulder. Failure to do so could reduce the amount of protection in an accident and cause severe injuries in a collision. Position the lap belt as low as on your hips-not on your waist, just it to a snug fit by pulling the portion upward through the latch 29