2001 Toyota Celica Owners Manual - Page 164

'01MY CELICA U (L/O 0008) -Loosening wheel nuts -Positioning the jack -Raising your vehicle 4. Loosen all the wheel nuts. Always loosen the wheel nuts before raising the vehicle. Turn the wheel nuts counterclockwise to loosen. To get maximum leverage, fit the wrench to the nut so that the handle is on the right side, as shown above. Grab the wrench near the end of the handle and pull up on the handle. Be careful that the wrench does not slip off the nut. Do not remove the nuts yet-just unscrew them about one-half turn. 5. Position the jack at the correct jack point as shown. Make sure the jack is positioned on a level and solid place. 6. After making sure that no one is in the vehicle, raise it high enough so that the spare tire can be installed. Remember you will need more ground clearance when putting on the spare tire than when removing the flat tire. To raise the vehicle, insert the jack handle into the jack (it is a loose fit) and turn it clockwise. As the jack touches the vehicle and begins to lift, double−check that it is properly positioned. CAUTION Never get under the vehicle when the vehicle is supported by the jack alone. 164 2001 CELICA (20766U)