2001 Toyota Celica Owners Manual - Page 167

'01MY CELICA U (L/O 0008) -After changing wheels 10. Reinstall the wheel ornament. 1. Put the wheel ornament into position. Steel wheels-Align the cutout of the wheel ornament with the valve stem as shown. 2. Then tap it firmly with the side or heel of your hand to snap it into place. 11. Check the air pressure of the replaced tire. Adjust the air pressure to the specification designated in Section 8. If the pressure is lower, drive slowly to the nearest service station and fill to the correct pressure. Do not forget to reinstall the tire inflation valve cap as dirt and moisture could get into the valve core and possibly cause air leakage. If the cap is missing, have a new one put on as soon as possible. 12. Restow all the tools, jack and flat tire securely. As soon after changing wheels as possible, tighten the wheel nuts to the torque specified in Section 8 with a torque wrench. Have a technician repair the flat tire and replace the spare tire with it. If your vehicle needs to be towed- (a) Towing with wheel lift type truck- -From front CAUTION Take due care in handling the ornament to avoid unexpected personal injury. -From rear CAUTION Before driving, make sure all the tools, jack and flat tire are securely in place in their storage location to reduce the possibility of personal injury during a collision or sudden braking. (b) Using flat bed truck 2001 CELICA (20766U) 167