2001 Toyota Celica Owners Manual - Page 67

'01MY CELICA U (L/O 0008) The daytime running light control sensor is on the top of the driver's side instrument panel. Do not place anything on the instrument panel, and/or do not affix anything on the windshield to block this sensor. High−low beams-For high beams, turn the headlights on and push the lever away from you (position 1). Pull the lever toward you (position 2) for low beams. The headlight high beam indicator light (blue light) on the instrument panel will tell you that the high beams are on. Flashing the high (position 3)-Pull the back. The high beam when you release the beam headlights lever all the way headlights turn off lever. TURN SIGNALS To signal a turn, push the headlight/ turn signal lever up or down to position 1. The key must be in the "ON" position. The lever automatically returns after you make a turn, but you may have to return it by hand after you change lanes. To signal a lane change, move the lever up or down to the pressure point (position 2) and hold it. If the turn signal indicator lights (green lights) on the instrument panel flash faster than normal, a front or rear turn signal bulb is burned out. You can flash the high beam headlights with the knob turned to "OFF". 2001 CELICA (20766U) 67