2001 Toyota MR2 Spyder Owners Manual - Page 151

01MY MR2(U) L/O 0008 -After changing wheels 9. Check the air pressure of the replaced tire. Adjust the air pressure to the specification designated on page 219 in Section 8. If the pressure is lower, drive slowly to the nearest service station and fill to the correct pressure. Do not forget to reinstall the tire inflation valve cap as dirt and moisture could get into the valve core and possibly cause air leakage. If the cap is missing, have a new one put on as soon as possible. 10. Restow all the tools, jack and flat tire securely. As soon as possible after changing wheels, tighten the wheel nuts to the torque specified on page 219 in Section 8 with a torque wrench. Have a technician repair the flat tire and replace the compact spare tire with it. CAUTION Before driving, make sure all the tools, jack and flat tire are securely in place in their storage location to reduce the possibility of personal injury during a collision or sudden braking. SB41025 Remove the wheel ornament from the flat tire before restowing the flat tire. 162 2001 MR2 (OM17482U)