2001 Toyota MR2 Spyder Owners Manual - Page 24

01MY MR2(U) L/O 0008 NOTICE Be sure to return the support rod to its clip before closing the engine hood. Closing the engine hood with the support rod up could cause the engine hood to bend. SB12038 SB12087 3. Hold the engine hood open by inserting the support rod into the slot. Before closing the engine hood, check to see that you have not forgotten any tools, rags, etc. and return the support rod to its clip-this prevents rattles. Then lower the engine hood and make sure it locks into place. If necessary, press down gently on the rear edge to lock it. LOCKING AND ENGINE HOOD UNLOCKING WITH To lock: Turn the key clockwise. The engine hood lock release lever can be locked by the key. When leaving the vehicle with the soft top lowered, make sure to lock the engine hood lock release lever with the key. The fuel filler door opener lever is locked at the same time. CAUTION After inserting the support rod into the slot, make sure the rod supports the engine hood securely from falling down on to your head or body. 2001 MR2 (OM17482U) 17