2001 Toyota Sienna Owners Manual - Page 71

01 SIENNA_U (L/O0008) -Front seat belt pretensioners CAUTION D After inserting the tab, make sure the tab and buckle are locked and that the seat belt extender is not twisted. D Do not insert coins, clips, etc. in the buckle as this may prevent you from properly latching the tab and buckle. D If the seat belt does not function To connect the extender to the seat belt, insert the tab into the seat belt buckle so that the "PRESS" signs on the buckle−release buttons of the extender and the seat belt are both facing outward as shown. You will hear a click when the tab locks into the buckle. When releasing the seat belt, press on the buckle−release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and extender itself. When not in use, remove the extender and store in the vehicle for future use. normally, immediately contact your Toyota dealer. Do not use the seat until the seat belt is fixed. It cannot protect an adult occupant or your child from injury. The driver and front passenger's seat belt pretensioners are designed to be activated in response to a severe frontal impact. When the airbag sensor detects the shock of a severe frontal impact, the front seat belts are quickly drawn back in by the retractors so that the belts snugly restrain the front seat occupants. The front seat belt pretensioners are activated even with no passenger in the front seat. Collisions occurring at certain speeds and angles may cause the seat belt pretensioners and SRS airbags not to operate all together. 2001 MY SIENNA (OM45406U) 71