2002 Toyota 4Runner Owners Manual - Page 232

'02 4Runner_U (L/O 0108) -Loosening wheel nuts -Positioning the jack 5. Position the jack at the correct jack point as shown. Make sure the jack is positioned on a level and solid place. Front Rear 4. Loosen all the wheel nuts. Always loosen the wheel nuts before raising the vehicle. Turn the wheel nuts counterclockwise to loosen. To get maximum leverage, fit the wrench to the nut so that the handle is on the right side, as shown above. Grab the wrench near the end of the handle and pull up on the handle. Be careful that the wrench does not slip off the nut. Do not remove the nuts yet-just unscrew them about one-half turn. Two-wheel drive models Front Rear Four-wheel drive models 232 2002 MY 4RUNNER_U (OM35787U)