2002 Toyota RAV4 Owners Manual - Page 38

(2) Charge by timer PROCEDURE 1. Push the "TIME SET" button to show the current time on the display. If the displayed time is not correct, enter the correct time with the "H" and "M" buttons. 2. Push the "TIME SET" button again to show the charging start time on the display. To change the start time, enter the desired start time with the "H" and "M" buttons. 3. Push the "TIME SET" button again to show the preheating/precooling start time on the display. If preheating/precooling is not needed, proceed to the next step. 4. Push the "TIME SET" button again. The display goes out and the timer setting completes. 5. Push the "TIMER CHARGE" button. The charger enters the timer charging mode and the "TIMER CHARGE" light comes on. 6. Insert the charge coupler within 3 minutes from step 5. Charging starts and stops automatically when the traction batteries are charged. To cancel the setting, push the "TIMER CHARGE" button again. If you insert the charge coupler after the set start charging time, charging starts at the set time of the next day. Do not remove the charge coupler until charging is completed. Although the message on the indicator panel on the charger remains the same as charging, the timer's charge mode on the vehicle is cancelled. If the charge coupler is pulled out, once put it back in the charger holder. After setting the timer for charging again, insert the charge coupler into the charge port on the vehicle. (3) Charging and preheating/precooling for vehicle interior The battery charge timer can also be used to preheat/precool the vehicle interior. PROCEDURE 1. Push the "TIME SET" button to show the current time on the display. If the displayed time is not correct, enter the correct time with the "H" and "M" buttons. 2. Push the "TIME show the charge play. To change the desired start "M" buttons. SET" button again to start time on the disthe start time, enter time with the "H" and 3. Push the "TIME SET" button again to show the preheating/precooling start time on the display. To change the time, enter the desired start time with the "H" and "M" buttons in consideration with the time you start driving. Move the temperature selector lever toward "WARM" or "COLD". You do not need to operate the fan speed selector at this time. 30