2003 Toyota 4Runner Owners Manual - Page 148

'03 4Runner_U (L/O 0208) To change the "LO" mode to "HI", push the switch twice. It takes about 30 seconds until the "LO" mode changes to the "HI" mode. Selecting the "N" mode- To change the "HI" mode to "N", push the height select switch on the " Ɲ" side once. If the underbody of the vehicle has touched the surface on bumpy roads, the vehicle height cannot be lowered with the height select switch. (c) Vehicle height adjustment To change the mode, push the height select switch on either side of "Ɯ" (higher) or "Ɲ" (lower). The height control indicator light indicates which mode is selected. (See "(e) Height control indicator light" described below.) Selecting the "HI" mode- Push the height select switch on the " Ɯ" side when the vehicle speed is under about 30 km/h (19 mph). To change the "N" mode to "HI", push the switch once. To change the "LO" mode to "N", push the height select switch on the " Ɯ" side once. Selecting the "LO" mode- Push the height select switch on the " Ɲ" side while the vehicle is stopped. To change the "N" mode to "LO", push the switch once. To change the "HI" mode to "LO", push the switch twice. If the underbody of the vehicle has touched the surface on bumpy roads, the vehicle height cannot be lowered with the height select switch. Even if the engine is stopped while the vehicle height is being lowered, the operation continues for up to 20 seconds. If within this 20 seconds, any of the side doors or the back door is opened, operation will continue for a further 15 seconds. 148 2003 4RUNNER from Aug. '02 Prod. (OM35795U)