2003 Toyota 4Runner Owners Manual - Page 19

'03 4Runner_U (L/O 0208) If the "LOCK" or "UNLOCK" switch is kept pressed in, the locking or unlocking operation is not repeated. Release the switch and then push again. The following adjustments can be made in this system. For details, contact your Toyota dealer. D Cancelling the wireless door locking or unlocking function D Cancelling the flash of the turn signal lights D Changing the volume of beep sound OPENING THE BACK WINDOW To open the back window, push the back window open switch of the transmitter for about 1 second. The window will fully open. At this time, you can hear a beep. If the ignition switch is in the "ON" position, the back window cannot be opened by the back window open switch. To open the back window with the key, see "Power back window" on page 26 in this section. The back window opening program by wireless remote control can be changed or disabled. For details, contact your Toyota dealer. "PANIC" SWITCH Pushing the "PANIC" switch blows the horn intermittently and flashes the headlights, tail lights and turn signal lights, and turns on the interior and luggage compartment lights. The "PANIC" switch is used to deter vehicle theft when you witness anyone attempting to break into or damage your vehicle. The alarm will last for one minute. To stop alarm midway, push any of the switch on the wireless remote control transmitter. You can also stop the alarm by turning the ignition key from "LOCK" to the "ON" position. 2003 4RUNNER from Aug. '02 Prod. (OM35795U) 19