2003 Toyota 4Runner Owners Manual - Page 24

'03 4Runner_U (L/O 0208) OPERATING THE DRIVER'S WINDOW Use the switch on the driver's door. Normal operation: The window moves as long as you hold the switch. To open: Lightly push down the switch. To close: Lightly pull up the switch. If the battery is disconnected or run down, the power window may not operate automatically and the jam protection function will not function correctly after you reconnect, replace or recharge the battery. In any of these cases, you should normalize the power window. To normalize the power window: 1. Push down the power window switch and lower the window halfway. 2. Pull up the switch until the window closes and hold the switch for a second. Automatic operation: Push the switch completely down or pull it completely up, and then release it. The window will fully open or close. To stop the window partway, lightly move the switch in the opposite direction and then release it. Jam protection function: During automatic closing operation or key off closing operation, the window stops and opens half way if something gets caught between the window and window frame. If the window receives a strong impact, this function may work even if nothing is caught. Make sure that the window opens and closes automatically. If the power window cannot be operated properly, have it checked by your Toyota dealer. CAUTION D Never try jamming any part of your body to make the jam protection function work intentionally. D The jam protection function may not work if something gets caught just before the window is fully closed. 24 2003 4RUNNER from Aug. '02 Prod. (OM35795U)