2003 Toyota 4Runner Owners Manual - Page 630

'03 4Runner_U (L/O 0211) -Raising your vehicle NOTICE Tighten all joints securely. Otherwise, the extension may come off and it may damage the paint or vehicle body. Front of vehicle When connecting a jack handle extension with jack handle end, use a Phillips- head screwdriver or jack handle to tighten the bolts on the joints as shown in the illustration. When connecting the jack handle with extension, tighten the bolt on the joint securely. When you tighten the bolt, make sure that it fits into the depression on the joint. 6. After making sure that no one is in the vehicle, as the jack touches the vehicle and begins to fit, doublecheck that it is properly positioned. Rear side only- When positioning the jack under the rear axle housing, make sure the groove on the top of the jack fits with the rear axle housing. 284 2003 4RUNNER from Oct. '02 Prod. (OM35804U)